Guardian ADF Screws
Moderator: Excalibur Marketing Dude
Guardian ADF Screws
I ordered a Guardian ADF for my Exomax and thought I would replace the screws while I am at it. I searched here on the forum and couldn't find out what size they are. Anyone know what size they are?
Bill
Bill
Excalibur Exomax Crossbow Twlight DLX scope
Excalibur Firebolt Arrows
NuFletch Ignitor Nocks
Carbon Express Torrid SS 100 gr. Broadheads
Summit Viper SD Climbing Tree Stand with Sherpa Hunting cart kit
U.S. Navy 1969-1973 USS Truxtun DLGN-35
Excalibur Firebolt Arrows
NuFletch Ignitor Nocks
Carbon Express Torrid SS 100 gr. Broadheads
Summit Viper SD Climbing Tree Stand with Sherpa Hunting cart kit
U.S. Navy 1969-1973 USS Truxtun DLGN-35
Re: Guardian ADF Screws
I don’t know what size they are but New screws come with your new Guardian ADF scope rail! Good luck!
Burky247365 Custom Scorpyd Orion Extreme
Re: Guardian ADF Screws
I have some stainless steel screws, I had to order 100 a few years ago, and should have some in my tackle box. Pm your address, I'll mail you some.
It’s not the way you rock, it’s the way that you roll!
-
- Posts: 4804
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: Guardian ADF Screws
They are 8/32 . 1/4" long is too short, 3/8" long is too long. Try to find some 5/16" long and you are good to go.
Re: Guardian ADF Screws
[ bought a bag on e bay. It had like 20 screws
Excalibur Revx
Hawke Xb 30 pro
16.5 inch wyverncreations.com zombie slayers
SWAT juggernaut broadhead
Hawke Xb 30 pro
16.5 inch wyverncreations.com zombie slayers
SWAT juggernaut broadhead
Re: Guardian ADF Screws
Are torx screws made out of 18/8 stainless strong enough or to strong. Don't want to break them or strip them while installing. Thought about buying some for 4 different excals.
Re: Guardian ADF Screws
I found some locally. Thank you!!
Bill
Excalibur Exomax Crossbow Twlight DLX scope
Excalibur Firebolt Arrows
NuFletch Ignitor Nocks
Carbon Express Torrid SS 100 gr. Broadheads
Summit Viper SD Climbing Tree Stand with Sherpa Hunting cart kit
U.S. Navy 1969-1973 USS Truxtun DLGN-35
Excalibur Firebolt Arrows
NuFletch Ignitor Nocks
Carbon Express Torrid SS 100 gr. Broadheads
Summit Viper SD Climbing Tree Stand with Sherpa Hunting cart kit
U.S. Navy 1969-1973 USS Truxtun DLGN-35
Re: Guardian ADF Screws
Glad to hear you're all good Bill.
It’s not the way you rock, it’s the way that you roll!
Re: Guardian ADF Screws
Installed the Guardian ADF on the Exomax this evening. The original scope mount screws came out ok using the allen wrench included with the Guardian ADF. I used the new screws that came with the Guardian and they were no problem to tighten up using the allen wrench that came with them. Will keep all the screws I have now just in case.
Got the Twlight DLX remounted and will shoot it some tomorrow to verify the POI. Resuming hunting on Monday.
Now piece of mind!! No more dry fires.
Bill
Got the Twlight DLX remounted and will shoot it some tomorrow to verify the POI. Resuming hunting on Monday.
Now piece of mind!! No more dry fires.
Bill
Excalibur Exomax Crossbow Twlight DLX scope
Excalibur Firebolt Arrows
NuFletch Ignitor Nocks
Carbon Express Torrid SS 100 gr. Broadheads
Summit Viper SD Climbing Tree Stand with Sherpa Hunting cart kit
U.S. Navy 1969-1973 USS Truxtun DLGN-35
Excalibur Firebolt Arrows
NuFletch Ignitor Nocks
Carbon Express Torrid SS 100 gr. Broadheads
Summit Viper SD Climbing Tree Stand with Sherpa Hunting cart kit
U.S. Navy 1969-1973 USS Truxtun DLGN-35
Re: Guardian ADF Screws
My POI did not change after replacing the stock scope mount with the Guardian ADF. Had to reposition one of the scope rings as well. Shot the bow over 30 times. Very happy that nothing changed after installing the Guardian.
Nice working with quality equipment!!
Bill
Nice working with quality equipment!!
Bill
Excalibur Exomax Crossbow Twlight DLX scope
Excalibur Firebolt Arrows
NuFletch Ignitor Nocks
Carbon Express Torrid SS 100 gr. Broadheads
Summit Viper SD Climbing Tree Stand with Sherpa Hunting cart kit
U.S. Navy 1969-1973 USS Truxtun DLGN-35
Excalibur Firebolt Arrows
NuFletch Ignitor Nocks
Carbon Express Torrid SS 100 gr. Broadheads
Summit Viper SD Climbing Tree Stand with Sherpa Hunting cart kit
U.S. Navy 1969-1973 USS Truxtun DLGN-35
Re: Guardian ADF Screws
I have looked into buying either the kit or individual screws from Ti64, and nowhere do they mention 5/16 length. Wondering if I need 5/16 or 1/4 inch.flightattendant100 wrote: ↑Fri Dec 01, 2017 1:16 pmThey are 8/32 . 1/4" long is too short, 3/8" long is too long. Try to find some 5/16" long and you are good to go.