mounting a charger crank on a matrix 380

Crossbow Hunting

Moderator: Excalibur Marketing Dude

Post Reply
codye
Posts: 15
Joined: Sun Jan 31, 2016 9:17 am
Location: S E Alberta
Contact:

mounting a charger crank on a matrix 380

Post by codye »

good morning forum
I purchased a charger E X T from bass pro in Calgary yesterday.
drove 3 hrs to home and no instruction on the retrofit for older
xcals has anyone done this retro ? old guy needs some info lol
thanks gang have fun and be safe
matrix 380 BO
TC 54 renegade PC
marlin 3030 336 RC G
User avatar
Boo
Posts: 14299
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: mounting a charger crank on a matrix 380

Post by Boo »

Remove the crank handle and place onto the stock so that the felt pad sits on the curve of the cheek piece and the flat of the Charger sits flat on the stock. Insert the both bases and pay attention to the arrows on the bases. You'll have to tape in the right side.See picture.
Using a fine felt marker or mechanical pencil, mark the out the left base as well as you can.
Remove the Charger and stick the left base on and locate the holes with a mechanical pencil. You'll have to extend the led lots. Then drill and attach.
Image
Some people just like stepping on rakes
codye
Posts: 15
Joined: Sun Jan 31, 2016 9:17 am
Location: S E Alberta
Contact:

Re: mounting a charger crank on a matrix 380

Post by codye »

good evening gang
thanks boo the picture is worth a thousand words
looks dams simple . you and the gang here have a good evening.
matrix 380 BO
TC 54 renegade PC
marlin 3030 336 RC G
User avatar
RobD
Posts: 334
Joined: Wed Feb 18, 2015 12:14 pm
Location: Mt. Pleasant, MI

Re: mounting a charger crank on a matrix 380

Post by RobD »

Boo -

Is the crank's string long enough to reach the 380's string without having to pull the 380's string up?
Micro Suppressor 400 TD
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)

Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
User avatar
Boo
Posts: 14299
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: mounting a charger crank on a matrix 380

Post by Boo »

RobD wrote:
Fri Sep 28, 2018 10:09 am
Boo -

Is the crank's string long enough to reach the 380's string without having to pull the 380's string up?
Nope, you need to pull the string up about an inch.
Some people just like stepping on rakes
Post Reply