How to mount the GoPro
Moderator: Excalibur Marketing Dude
- Reinyrooster
- Posts: 470
- Joined: Mon Aug 24, 2015 9:08 am
- Location: Kitchener, Ontario
How to mount the GoPro
Wanna mount my GoPro on my new Micro 335 but can't seem to find and large enough flat surface to use the adhesive pad. Looking for suggestions as to how to mount the camera.
Thanks
Thanks
Re: How to mount the GoPro
I mounted mine to a Munch Mount, works great!
It’s not the way you rock, it’s the way that you roll!
Re: How to mount the GoPro
LOve it!!!
I now have a "Xtra"gorpro camo case that I use.
It is mounted on my M380 with a bolt I screwed through from the bottom with several rubber bushings and washers.
- Reinyrooster
- Posts: 470
- Joined: Mon Aug 24, 2015 9:08 am
- Location: Kitchener, Ontario
Re: How to mount the GoPro
Good stuff guys. Where does one find the Munch Mount should I choose to go that route?
Re: How to mount the GoPro
You can find him on Facebook, or on the trading post.
It’s not the way you rock, it’s the way that you roll!
- Reinyrooster
- Posts: 470
- Joined: Mon Aug 24, 2015 9:08 am
- Location: Kitchener, Ontario
Re: How to mount the GoPro
OK, thanks
Re: How to mount the GoPro
Or you could send him a pm!
vixen 11
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
-
- Posts: 130
- Joined: Fri Sep 02, 2016 1:25 pm
- Location: Poplar Bluff, MO
Re: How to mount the GoPro
Is there a way to mount a camera like a Go Pro and not have some distortion after the arrow is released? I have a camera and get clear video before but once the shot is taken the video is not as focused. I was thinking about something on top of my scope.
BD400 with XV530IR scope, HHA Optimizer
Zombie 20 inch with lighted nocks
Afflictor Broadheads K2 125 grain
Bulldog 380 HHA Optimizer with the XV530IR scope, Triggertech
Spinal Tapps- 18-inch
Afflictor Broadheads K2 125 grain
Zombie 20 inch with lighted nocks
Afflictor Broadheads K2 125 grain
Bulldog 380 HHA Optimizer with the XV530IR scope, Triggertech
Spinal Tapps- 18-inch
Afflictor Broadheads K2 125 grain
Re: How to mount the GoPro
Could always print up a clamp that goes on the front scope bell that you can mount the gopro. Here is one that I drafted in a different thread when I was making one that would add a picatinny rail piece.
https://www.excaliburcrossbow.com/phpBB3/viewtopic.php?f=1&t=67376&p=679528&hilit=print#p679528
https://www.excaliburcrossbow.com/phpBB3/viewtopic.php?f=1&t=67376&p=679528&hilit=print#p679528
2002 Exomag
Varizone with Burris Sig. Zee Rings
My mods:
Scope cover adapters
Optomechanical rangefinder
Custom built lit nocks
BCY Trophy flemish string
20" XX75 2219 arrows with 4" feathers
Varizone with Burris Sig. Zee Rings
My mods:
Scope cover adapters
Optomechanical rangefinder
Custom built lit nocks
BCY Trophy flemish string
20" XX75 2219 arrows with 4" feathers
Re: How to mount the GoPro
Actually this looks really simple and effective, I like this a lot!
It’s not the way you rock, it’s the way that you roll!
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: How to mount the GoPro
They make a mount that goes on the front bell of the scope .
Re: How to mount the GoPro
I have used a handle bar mount clamped to my scope