Excalibur micro 315 stringing aid

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Post Reply
Posts: 6
Joined: Mon Apr 15, 2019 3:44 pm

Excalibur micro 315 stringing aid

Post by Doc65 » Tue Jun 18, 2019 8:49 am

I receive a new micro 315 and was hoping someone could tell me the length of the stringing aid.

Posts: 1514
Joined: Wed Jun 04, 2014 7:26 pm
Location: Washington Island Wisc.

Re: Excalibur micro 315 stringing aid

Post by W.Miguire » Tue Jun 18, 2019 2:20 pm

The stringing aid is adjustable , you can make it any size you want.

Posts: 2966
Joined: Mon Jul 12, 2010 10:21 pm
Location: Thompson/Nicola, British Colombia

Re: Excalibur micro 315 stringing aid

Post by hankenhunter » Tue Jun 18, 2019 5:07 pm

My stringer when on the the limbs reaches my arrow hold down. Very little effort is needed to cock it that way. All you really need is just enough to loosen the string for changing. Any shorter is a waste of energy. Hope that helps,
2010 Equinox The "Beast"
Big John's Zombies with helical blazers
S-5 string stoppers
150 gr. boltcutters, 145 gr. Saunders blunts
Dead zone scope
Vixen master string
DaGriz knife

Posts: 353
Joined: Sat Aug 18, 2018 8:10 pm
Location: Sout. Illinois

Re: Excalibur micro 315 stringing aid

Post by Cardinalsfanforever » Tue Jun 18, 2019 11:42 pm

I got a micro 315 recently and can say I love it. the string changing thing had to be adjusted to adjust the draw string. I just kept adjusting it until I could remove and replace the drawstring accordingly. I must say tho the factory string stretched a lot more than the string on my 380.
matrix 380, 18" BEZS, Vixenmaster
micro 315, 17" BE Execs. Vixenmaster
Axiom SMF, FIRE BOLTS Vixenmaster

Posts: 137
Joined: Fri Mar 18, 2016 3:21 pm
Location: Vermont

Re: Excalibur micro 315 stringing aid

Post by Smong2000 » Wed Jun 19, 2019 11:23 am

If you don't have a stringing aid it's simple to make one from 550 paracord. Just tie in 2 loops that are tight enough not to slip up the limb but have a small space you can pull the string through. Length of aid is not super critical, prior post is right, just long enough to put slack in the bowstring so it can go over the end of the limb when aid is pulled to cock. Youtube has a few videos showing how to make them...

Post Reply