New Broadheads

Crossbow Hunting

Moderator: Excalibur Marketing Dude

W.Miguire
Posts: 1662
Joined: Wed Jun 04, 2014 7:26 pm
Location: Washington Island Wisc.

New Broadheads

Post by W.Miguire »

I see that Excalibur has a new broadhead , it is kinda like the Spitfire . it has a 2" cut and comes in a 100 and 150 . the 150 is stainless. for you folks that use this type of head you should look into them.
W.M.
User avatar
janesy
Posts: 4721
Joined: Sat Dec 05, 2015 8:20 pm
Location: Beavertown. Ont

Re: New Broadheads

Post by janesy »

W.Miguire wrote:
Sat Jan 11, 2020 6:49 pm
I see that Excalibur has a new broadhead , it is kinda like the Spitfire . it has a 2" cut and comes in a 100 and 150 . the 150 is stainless. for you folks that use this type of head you should look into them.
W.M.
Handled it a couple times in the past two days. Very impressive simple head. It's going to do well
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
W.Miguire
Posts: 1662
Joined: Wed Jun 04, 2014 7:26 pm
Location: Washington Island Wisc.

Re: New Broadheads

Post by W.Miguire »

It looks good just wondering about the cost .
User avatar
janesy
Posts: 4721
Joined: Sat Dec 05, 2015 8:20 pm
Location: Beavertown. Ont

Re: New Broadheads

Post by janesy »

There is a thread on here with many tears shed already about the cost :lol: . They are MSRP around $65. Nobody pays MSRP.

Retail is landing around 45-50.

Image
Image
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
User avatar
janesy
Posts: 4721
Joined: Sat Dec 05, 2015 8:20 pm
Location: Beavertown. Ont

Re: New Broadheads

Post by janesy »

Lots of detail went into the blade geometry to keep them closed when needed but open on light hide.
Also the shock absorber is a simply filament that is easily replaced, as shown above.
Same details for the 100Grn
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
User avatar
Bcxbow
Posts: 1361
Joined: Fri Jun 30, 2017 5:44 am
Location: North Georgia

Re: New Broadheads

Post by Bcxbow »

deleted, wrong video
Hybrid Micro BD 360
Micro Mag 340
Boo Strings - Trinity Strings
Zombie Slayers
Swat & TOTA Broadheads
User avatar
janesy
Posts: 4721
Joined: Sat Dec 05, 2015 8:20 pm
Location: Beavertown. Ont

Re: New Broadheads

Post by janesy »

Bcxbow wrote:
Sun Jan 12, 2020 11:59 am
deleted, wrong video
But I did find this while I was there....

https://youtu.be/KXGLSF3MuZw
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
ChrisK
Posts: 147
Joined: Tue Mar 13, 2018 12:47 pm
Location: Rockville Indiana

Re: New Broadheads

Post by ChrisK »

I can’t get the video to work from my phone but I think I will google the video
ko4nrbs
Posts: 969
Joined: Sun Dec 02, 2012 7:09 pm
Location: Madison, Alabama

Re: New Broadheads

Post by ko4nrbs »

I hope it does well!! I really like Excalibur and wish them well.

The design looks wicked to me.
Bill
Excalibur Exomax Crossbow Twlight DLX scope
Excalibur Firebolt Arrows
NuFletch Ignitor Nocks
Carbon Express Torrid SS 100 gr. Broadheads
Summit Viper SD Climbing Tree Stand with Sherpa Hunting cart kit
U.S. Navy 1969-1973 USS Truxtun DLGN-35
ChrisK
Posts: 147
Joined: Tue Mar 13, 2018 12:47 pm
Location: Rockville Indiana

Re: New Broadheads

Post by ChrisK »

I googled them but couldn’t find them
User avatar
janesy
Posts: 4721
Joined: Sat Dec 05, 2015 8:20 pm
Location: Beavertown. Ont

Re: New Broadheads

Post by janesy »

ChrisK wrote:
Sun Jan 12, 2020 3:08 pm
I googled them but couldn’t find them
Here you go, info here. They won't be available until April likely

https://www.excaliburcrossbow.com/phpBB3/viewtopic.php?f=1&t=71035
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
ChrisK
Posts: 147
Joined: Tue Mar 13, 2018 12:47 pm
Location: Rockville Indiana

Re: New Broadheads

Post by ChrisK »

Thanks
longbow joe
Posts: 4246
Joined: Sat Jun 06, 2015 9:55 pm
Location: south eastern pa (bucks county)

Re: New Broadheads

Post by longbow joe »

I can drop a Turkey with a spitfire max.
But l think lm gonna give them a try for spring Turkey. I like em a lot ....nice n wide. I'm not familiar with the filament explain the need for it. The xact dosnt have it?
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
W.Miguire
Posts: 1662
Joined: Wed Jun 04, 2014 7:26 pm
Location: Washington Island Wisc.

Re: New Broadheads

Post by W.Miguire »

They look good and deadly . the cost is a bit high but if that what it cost thats what they cost it will be up to you if that's what you want. I hope they are not made in China .
W.M.
User avatar
Bcxbow
Posts: 1361
Joined: Fri Jun 30, 2017 5:44 am
Location: North Georgia

Re: New Broadheads

Post by Bcxbow »

longbow joe wrote:
Sun Jan 12, 2020 5:13 pm
I can drop a Turkey with a spitfire max.
But l think lm gonna give them a try for spring Turkey. I like em a lot ....nice n wide. I'm not familiar with the filament explain the need for it. The xact dosnt have it?

LBJ
The filament is what they are calling a crushable insert that will allow full expansion in soft tissue but if a blade hits bone it will allow the blade to pivot to the rear further to minimize blade damage and increase penetration. As Chris stated it is easily replaceable. Brilliant concept imo.
Hybrid Micro BD 360
Micro Mag 340
Boo Strings - Trinity Strings
Zombie Slayers
Swat & TOTA Broadheads
Post Reply