Shout out to Danny Miller

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Post Reply
longbow joe
Posts: 2959
Joined: Sat Jun 06, 2015 9:55 pm
Location: south eastern pa (bucks county)

Shout out to Danny Miller

Post by longbow joe » Tue May 19, 2020 12:28 pm

No surprise but just wanted to give danny a plug...
He was overly helpful the other day and patient when l basically ordered every screw and bolt for my vortex I'm rebuilding.
He even had a now discontinued swept lever for the triggertec l purchased
I know he is probably just set in his ways and wants nothing to do with internet sales but it's a shame some young kid cant at least make him a simple website with his stuff he could definitely increase his sales I'm kinda computer shy but with a buisness you either adapt or die. Just pointing out that he deserves to do as well as anyone...great guy deserves the patronage!
Micro 335 camo crossbones /matrix 330 nikon bolt /vixen ll / offspring with a micro stock crossbones/ matrix 355 with a micro stock crossbones/ metal ibex (adopted manco morto)/Phoenix/ trigger tec's /xacts/super freak ex's/ spitfires/zombies

ldock
Posts: 80
Joined: Wed Dec 01, 2010 11:22 pm
Location: South Texas

Re: Shout out to Danny Miller

Post by ldock » Tue May 19, 2020 2:23 pm

I will also give Mr. Miller(Danny)a plug The other day i called him about a katana385 I was thinking of purchasing. He gave me pointers on what to look for and asked the guy to send me pictures so I could inspect the bow as per Mr. Miller. He answered every question except the main one he told me to look for. The guy sent every picture except the specific one's Mr. miller wanted me to really look close at. Needless the guy still has the bow he had for sale. Cudos to Mr. Miller for his time and expertise. Needless to say as the old saying goes he has probably forgeten more about the excal, katana line than most people have learned. Again I can't thank Mr. miller enough he is the excaliber guru.

Hatchet
Posts: 90
Joined: Fri Jan 17, 2020 10:44 am
Location: Maine

Re: Shout out to Danny Miller

Post by Hatchet » Tue May 19, 2020 2:54 pm

I read about Danny on this forum. When I needed his help he was just as described. First time you talk to him and it's like talking to an old friend.

User avatar
RobD
Posts: 270
Joined: Wed Feb 18, 2015 12:14 pm
Location: Mt. Pleasant, MI

Re: Shout out to Danny Miller

Post by RobD » Tue May 19, 2020 6:58 pm

And as always, never call during your 10-minute break at work. You need a lunch hour at the minimum.
Micro 360 TD Pro (Mossy Oak)
Micro 360 TD Pro (Kryptek Altitude)
Micro 360 TD (Mossy Oak) and basically a Pro now

Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man! | XV530IR

mr meat
Posts: 4673
Joined: Mon Jan 05, 2009 4:40 pm
Location: The land of ice and snow North Bay

Re: Shout out to Danny Miller

Post by mr meat » Tue May 19, 2020 7:07 pm

Will really miss talking to him at BooFest
vixen 11
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200

matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen

User avatar
amythntr
Posts: 6398
Joined: Wed Nov 13, 2013 12:26 pm
Location: T.P.R.N.J.

Re: Shout out to Danny Miller

Post by amythntr » Wed May 20, 2020 11:19 am

.....Dr Danny Miller and his Excalamulance....are truly top notch...

...for those of you who never experienced Boofest (at Boo's (Don's) place) in Ontario there is no better sight than seeing Dr Danny in his Dr white jacket with his Excalescope around his neck as he checks the condition of a sick Excalibur needing the Doctor's touch....\

...upon rendering his diagnosis, a trip into his Excalamulance for further testing (and possible delicate surgery) usually renders the patient in perfect health in a relatively short period of time....

...ready to venture off into the woods again....

....and the co-pay is painless also. :eusa-clap: :eusa-clap:
When you are in a tough situation and wonder where God is; ...the Teacher is always quiet during the test.

Anthony :D

A420TD (Assassinatore di Cervi)
A360 (l'Assassino)
AXE 340
NMare 335(On loan)
ZS,Ex
Spits
Boo,NChunterkw,Vixenm

flightattendant100
Posts: 4260
Joined: Thu Jul 30, 2009 5:06 pm
Location: Ft. Worth, Texas

Re: Shout out to Danny Miller

Post by flightattendant100 » Wed May 20, 2020 4:37 pm

RobD wrote:
Tue May 19, 2020 6:58 pm
And as always, never call during your 10-minute break at work. You need a lunch hour at the minimum.
Late forum member Awshucks told me once, before you call DANNY.... go pee, then refill your coffee mug, then call DANNY. Also don’t call him on your 30 minute lunch break.😁

rmb721
Posts: 77
Joined: Sat Feb 28, 2015 10:53 pm
Location: Central PA

Re: Shout out to Danny Miller

Post by rmb721 » Wed May 20, 2020 9:56 pm

I just talked to him yesterday for the first time. Very pleasant to deal with. He had the parts I wanted ready to ship before we were done talking.

User avatar
flinthead
Posts: 173
Joined: Sat Apr 12, 2014 8:59 am
Location: Pageland, SC

Re: Shout out to Danny Miller

Post by flinthead » Sun May 24, 2020 8:39 pm

Danny is the man!! I was talking to him one day when a guy walked into the shop wanting a arrow reflected... Danny said looks like you have already shot this one through a couple of deer!

I love being in a bow shop talking bow hunting! I felt like I was there with them.
Vixen II
Equinox
Lumenok
Innerloc Broadheads

drywallerdave1
Posts: 59
Joined: Thu Jan 24, 2019 8:18 pm

Re: Shout out to Danny Miller

Post by drywallerdave1 » Wed May 27, 2020 5:35 pm

What’s his website again???

User avatar
RobD
Posts: 270
Joined: Wed Feb 18, 2015 12:14 pm
Location: Mt. Pleasant, MI

Re: Shout out to Danny Miller

Post by RobD » Wed May 27, 2020 5:53 pm

drywallerdave1 wrote:
Wed May 27, 2020 5:35 pm
What’s his website again???
He doesn't do online/web stuff. He believes in the old-fashioned way of telephone.

Horizontal Archery, LLC
37432 Fifth Avenue
Sardis, OH 43946
Dan Miller - 740-483-2312
Micro 360 TD Pro (Mossy Oak)
Micro 360 TD Pro (Kryptek Altitude)
Micro 360 TD (Mossy Oak) and basically a Pro now

Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man! | XV530IR

User avatar
vaXbow
Posts: 135
Joined: Wed Sep 28, 2011 7:20 pm
Location: Toano, Va

Re: Shout out to Danny Miller

Post by vaXbow » Sun Jun 07, 2020 9:40 pm

Not knowing Danny was on vacation last week, I left a V-Mail to give me a call because I had a question. He called me today, Sunday, just to see what I needed. Can’t top that!
The Horizontal Zone
[email protected]

Post Reply