Tact Zone O ring for battery turret
Moderator: Excalibur Marketing Dude
Tact Zone O ring for battery turret
I don't remember ever seeing this mentioned on here, I just went to replace the battery in the scope and the thin O ring separated/broke as I was unscrewing the cap. Anyone else have that happen, does Excalibur have them, or where did you find an O ring to replace it. Probably not needed, but I would prefer to have one in place to keep moisture out.
It may be an easier item to find than I think, just wondering what others have done if they needed to replace that O ring.
It may be an easier item to find than I think, just wondering what others have done if they needed to replace that O ring.
Re: Tact Zone O ring for battery turret
Autoparts or local hardware store could probably fix you up.
Re: Tact Zone O ring for battery turret
My first thoughts also, will give it a shot, maybe even a plumbing supply, thanks. Just hate to run all over looking for a 25c O ring and spend $25 in gas, been there done that!
Re: Tact Zone O ring for battery turret
Maybe found at a watch repair also.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: Tact Zone O ring for battery turret
I would never have thought of that, good possibility there, thanks!
-
- Posts: 615
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Tact Zone O ring for battery turret
McMaster-Carr would most likely have it if none of the other places do.
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: Tact Zone O ring for battery turret
OK, that was easy enough, I just called Excalibur and talked to Dawn. She offered to send a cap with the O ring installed, I told her I just needed the O ring and that they were easy to replace, should be getting 2 of them in the mail shortly.
Thank you to Dawn and Excalibur!
Thank you to Dawn and Excalibur!
-
- Posts: 615
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Tact Zone O ring for battery turret
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: Tact Zone O ring for battery turret
I'm too late..that was my thoughts right there.artifact wrote: ↑Tue Sep 13, 2022 9:22 amOK, that was easy enough, I just called Excalibur and talked to Dawn. She offered to send a cap with the O ring installed, I told her I just needed the O ring and that they were easy to replace, should be getting 2 of them in the mail shortly.
Thank you to Dawn and Excalibur!
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Tact Zone O ring for battery turret
Don't over tighten the caps. When you feel the O-Ring squishing, that's enough. Just a tech tip from a dummy!
It’s not the way you rock, it’s the way that you roll!
Re: Tact Zone O ring for battery turret
Thanks for the tip, that does make sense since it's a very thin O ring, will do as you suggested.
Re: Tact Zone O ring for battery turret
That is good advice...
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Tact Zone O ring for battery turret
Looks like xcalibur may have helped 2 of us, at least your O ring is still good!
Re: Tact Zone O ring for battery turret
It's not my bow, but I out it back together last season and it's held tight lol.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme