Crossbow Hunting
Moderator: Excalibur Marketing Dude
frydaddy
Posts: 113 Joined: Thu Sep 20, 2007 9:10 pm
Location: Screven Ga.
Contact:
Post
by frydaddy » Tue Aug 26, 2008 10:17 pm
Are half moon drivers ok to us with my excalibur?
Well i didn't wake up on the Coolen board.
wabi
Posts: 13443 Joined: Wed Oct 09, 2002 9:21 pm
Location: Ohio
Post
by wabi » Tue Aug 26, 2008 11:01 pm
Half Moon Nocks are not recommended for the Excaliburs. They are not necessary with Excalibur's string release (top latching claws) and the chance of a dry-fire condition caused by mis-orientation of a half moon nock is always a possibility.
wabi
dick195252
Posts: 3084 Joined: Sat Aug 04, 2007 1:57 am
Location: McEwen Tennessee
Post
by dick195252 » Wed Aug 27, 2008 1:47 am
I would stick with the Flat nocks
Exomax, Lumizone, Boo String, NRA, ACf, Member, [Proud Grandpa!!!]
frydaddy
Posts: 113 Joined: Thu Sep 20, 2007 9:10 pm
Location: Screven Ga.
Contact:
Post
by frydaddy » Wed Aug 27, 2008 7:42 am
Thanks guys for your help. Walmart has good deal on some
bolts that's why i ask. They have moon nocks , so i figured i would
check and see what yall said.
frydaddy
Well i didn't wake up on the Coolen board.
Rich
Posts: 1512 Joined: Tue Mar 14, 2006 8:33 am
Location: Woodford, VA
Post
by Rich » Wed Aug 27, 2008 7:58 am
If it's a good deal, buy them and pull out the halfmoon and replace with flat nocks or inserts.
Rich
frydaddy
Posts: 113 Joined: Thu Sep 20, 2007 9:10 pm
Location: Screven Ga.
Contact:
Post
by frydaddy » Wed Aug 27, 2008 10:15 am
I am, to good of deal. Will keep me in bolts for years.
Well i didn't wake up on the Coolen board.