lighted nocks for quills?
Moderator: Excalibur Marketing Dude
-
- Posts: 84
- Joined: Sat Dec 06, 2014 11:32 am
- Location: Galloway Twp, NJ
lighted nocks for quills?
What lighted nocks are available and will fit the quill arrows that come with the Micro? I thought I read about it somewhere but couldn't find it again. Also, which ones do you all recommend? Thanks.
2015 Excalibur Micro 335
-
- Posts: 84
- Joined: Sat Dec 06, 2014 11:32 am
- Location: Galloway Twp, NJ
Re: lighted nocks for quills?
Hmmmmmm......nobody huh? I'm sure I read it somewhere.
2015 Excalibur Micro 335
Re: lighted nocks for quills?
Hey Mike....the interior diameter (ID) is .300...Hence,
the Ignitors by Nu-FletchArchery (ID .300 Crossbow) (39gn), and
http://www.nufletch.com/#!online-store/ ... d=38379031
Lumenoks by Burt Coyote (GTF3) 3 pack (28gn).
http://lumenok.net/shop/Crossbow/c4/p35 ... _info.html
...either of these should suit you just fine.
The difference between the two other than their weight difference is the Lumenoks get pushed in, no gluing, but do require a pair of rubber type pliers (Danny Millers arra pliers $18) to extinguish (some sand them down ever so slightly to eliminate this).....and
....the Ignitors (which comes in 3 parts) requires an insert to be lightly glued in to the back of the shaft in which the light stick goes in. The plastic cover (nock) is slid into the insert. Extinguishing is as simple as pulling out the plastic cover nock, taking out the light stick and pulling the light stick by both ends to extinguish and then reassembling....
Hope this helps Mike,
Anthony
the Ignitors by Nu-FletchArchery (ID .300 Crossbow) (39gn), and
http://www.nufletch.com/#!online-store/ ... d=38379031
Lumenoks by Burt Coyote (GTF3) 3 pack (28gn).
http://lumenok.net/shop/Crossbow/c4/p35 ... _info.html
...either of these should suit you just fine.
The difference between the two other than their weight difference is the Lumenoks get pushed in, no gluing, but do require a pair of rubber type pliers (Danny Millers arra pliers $18) to extinguish (some sand them down ever so slightly to eliminate this).....and
....the Ignitors (which comes in 3 parts) requires an insert to be lightly glued in to the back of the shaft in which the light stick goes in. The plastic cover (nock) is slid into the insert. Extinguishing is as simple as pulling out the plastic cover nock, taking out the light stick and pulling the light stick by both ends to extinguish and then reassembling....
Hope this helps Mike,
Anthony
Last edited by amythntr on Sat Dec 20, 2014 1:57 pm, edited 1 time in total.
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
-
- Posts: 84
- Joined: Sat Dec 06, 2014 11:32 am
- Location: Galloway Twp, NJ
Re: lighted nocks for quills?
So you like the Nufletch? And do you like the flat or moon?
2015 Excalibur Micro 335
Re: lighted nocks for quills?
Mike:njlungbuster wrote:So you like the Nufletch? And do you like the flat or moon?
I have been partial to the Lumenoks but will most likely be using the Ignitors on the M335...Flat most certainly...
...there seems to be more people using Lumenoks....but some have been using and loving the Ignitors with more purchasing them during their great Holiday 25% off and free shipping deal.
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
- Carnivorous
- Posts: 3779
- Joined: Sun Dec 25, 2005 12:56 pm
- Location: Belleriver Ontario
Re: lighted nocks for quills?
I am using the Lumenoks & they are working great. However I am using Black Eagle zombies & not the quills for my Micro..
Jeff
Jeff
A touch of frost has heightened your awareness and your heart steadily beats in anticipation. Your senses are suddenly alert to the movement on the forest floor and you realize that the moment of truth is at hand.
Re: lighted nocks for quills?
What speed do you get with this combination?
Re: lighted nocks for quills?
im using 16'' quills and diablos and firebolts all with luminocks and quick fletch ,and 150gr field points
-
- Posts: 84
- Joined: Sat Dec 06, 2014 11:32 am
- Location: Galloway Twp, NJ
Re: lighted nocks for quills?
It's flat better for a particular reason? And what were you talking about when you said some guys are sanding the lumenocks down?amythntr wrote:I have been partial to the Lumenoks but will most likely be using the Ignitors on the M335...Flat most certainly...
2015 Excalibur Micro 335
Re: lighted nocks for quills?
... The inside diameter ever so slightly as to not having to use pliers to extinguish!
Anthony
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: lighted nocks for quills?
Reason most guys use flats is that's what Excalibur recommend s and that's what they sell in their packages. Not sure why but they sure do work !
-
- Posts: 84
- Joined: Sat Dec 06, 2014 11:32 am
- Location: Galloway Twp, NJ
Re: lighted nocks for quills?
Cool thank you.fellas2 wrote:Reason most guys use flats is that's what Excalibur recommend s and that's what they sell in their packages. Not sure why but they sure do work !
2015 Excalibur Micro 335
-
- Posts: 84
- Joined: Sat Dec 06, 2014 11:32 am
- Location: Galloway Twp, NJ
Re: lighted nocks for quills?
So I was picking up my daughter's new bow today and I picked up a package of ignitors. Got the red. Very easy to pull the stock inserts and put these in. Very bright and super easy. I'm very pleased. Now just gotta get out there and shoot them.amythntr wrote:Mike:njlungbuster wrote:So you like the Nufletch? And do you like the flat or moon?
I have been partial to the Lumenoks but will most likely be using the Ignitors on the M335...Flat most certainly...
...there seems to be more people using Lumenoks....but some have been using and loving the Ignitors with more purchasing them during their great Holiday 25% off and free shipping deal.
Anthony
2015 Excalibur Micro 335
Re: lighted nocks for quills?
I use the lumenoks and to turn them off I just use a cheap pair of small pliers with some black tape wrapped on the jaws or my teeth. Just bite down with a little twist and pull; no problem lights out.
Mag Air
Sig Sauer Romeo 5
Excalibur Quills
Tooth of the Arrow broadheads
Vixenmaster strings
Sig Sauer Romeo 5
Excalibur Quills
Tooth of the Arrow broadheads
Vixenmaster strings
Re: lighted nocks for quills?
.... Thank God for Good teeth!canoe13 wrote:I use the lumenoks and to turn them off I just use a cheap pair of small pliers with some black tape wrapped on the jaws or my teeth. Just bite down with a little twist and pull; no problem lights out.
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings