Lumenok
Moderator: Excalibur Marketing Dude
Lumenok
Hey guys
does any one know of a simple way to turn off the Lumenok on the carbon arrows?
does any one know of a simple way to turn off the Lumenok on the carbon arrows?
Micro 355
Hawke xb30 pro scope T&T Triger boo force 10 string Zombie slayers 16.5 arrows c/w right helical blazer vanes aluminum nocks or lumenoks
Micro 315
Tact zone scope force 10 string 16" inch executioner arrows aluminum nocks or lumenoks
Hawke xb30 pro scope T&T Triger boo force 10 string Zombie slayers 16.5 arrows c/w right helical blazer vanes aluminum nocks or lumenoks
Micro 315
Tact zone scope force 10 string 16" inch executioner arrows aluminum nocks or lumenoks
Re: Lumenok
I do like that to turn off mine, probably because i have not strong fingers.
Same when i need to remove them for change the battery.
Matrix Bd330, Bd400
Re: Lumenok
Danny Millars arrer puller does the biz
- GrassyKnoll
- Posts: 1421
- Joined: Sun Dec 12, 2010 9:13 am
- Location: Jackson, NJ
Re: Lumenok
Here ya go.... A short video to help you out, and you can substitute a round rubber arrow puller as well for the tool used in the video.....
Video:
https://www.youtube.com/watch?v=k10kfiu9dhE
and the rubber gripper:
http://www.dhgate.com/product/getProduc ... 1c1fb53ac6
Video:
https://www.youtube.com/watch?v=k10kfiu9dhE
and the rubber gripper:
http://www.dhgate.com/product/getProduc ... 1c1fb53ac6
Matrix 380 Xtra with Vortex Viper XBR, Trigger Tech,
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
Re: Lumenok
Thanks for the tip guys;)
Micro 355
Hawke xb30 pro scope T&T Triger boo force 10 string Zombie slayers 16.5 arrows c/w right helical blazer vanes aluminum nocks or lumenoks
Micro 315
Tact zone scope force 10 string 16" inch executioner arrows aluminum nocks or lumenoks
Hawke xb30 pro scope T&T Triger boo force 10 string Zombie slayers 16.5 arrows c/w right helical blazer vanes aluminum nocks or lumenoks
Micro 315
Tact zone scope force 10 string 16" inch executioner arrows aluminum nocks or lumenoks
Re: Lumenok
you don't need any special tool...
hold the end of the lumenok between tour thumb and index finger...jiggle the arrow up and down by briskly rotating your fingers up and down. your fingers should stay in the same plane but the point of the arrow goes up and down many inches using your pinched fingers as a fulcrum instead of the tool in that first video, its simple and safe and requires no tools or twisting of the nock.
norm
hold the end of the lumenok between tour thumb and index finger...jiggle the arrow up and down by briskly rotating your fingers up and down. your fingers should stay in the same plane but the point of the arrow goes up and down many inches using your pinched fingers as a fulcrum instead of the tool in that first video, its simple and safe and requires no tools or twisting of the nock.
norm
Re: Lumenok
buy a piece of rubber gasline about 6 in long the same size of the lumenok put it on the nock and wiggle it back and forth works like a charm..coolhl wrote:you don't need any special tool...
hold the end of the lumenok between tour thumb and index finger...jiggle the arrow up and down by briskly rotating your fingers up and down. your fingers should stay in the same plane but the point of the arrow goes up and down many inches using your pinched fingers as a fulcrum instead of the tool in that first video, its simple and safe and requires no tools or twisting of the nock.
norm
Re: Lumenok
mingle wrote:buy a piece of rubber gasline about 6 in long the same size of the lumenok put it on the nock and wiggle it back and forth works like a charm..coolhl wrote:you don't need any special tool...
hold the end of the lumenok between tour thumb and index finger...jiggle the arrow up and down by briskly rotating your fingers up and down. your fingers should stay in the same plane but the point of the arrow goes up and down many inches using your pinched fingers as a fulcrum instead of the tool in that first video, its simple and safe and requires no tools or twisting of the nock.
norm
Many use gas hose also..I use pair of nock pliers i had for 50 years and rubber homemade arrow puller works also...
Re: Lumenok
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Re: Lumenok
The best way I've seen so far is using Burt Coyote's Extinguisher.
Some people just like stepping on rakes
Re: Lumenok
i do agree......even so easy Anthony could do itBoo wrote:The best way I've seen so far is using Burt Coyote's Extinguisher.
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Re: Lumenok
I hold the bolt pointing down, and then with my right hand palm it around the fletching. Pinch the Luminock perpendicular to the wires and just wiggle it, Until it just turns off. If surprisingly easy to do if you hold it right.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Lumenok
The trick is to do it with the wires pointing in the right direction. It kind of make them the pivot points if you will
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Lumenok
I must say Danny Millar arrow puller beats them all. I have two just in case! Love them!
Its perfect for arrow removal from the target and turning off the lumenok.
Its perfect for arrow removal from the target and turning off the lumenok.
Darz Bór!
Re: Lumenok
Just make sure that when you put them away you have pulled them enough that they do not come back on, sounds impossible but its happened to me. I had contacted the company and they told me it can happen if you stop pulling it the second it goes out.
Exocet 200
S5 System
Shadowzone
S5 System
Shadowzone