Fixed-Blade Broadheads Fit In Quiver?
Moderator: Excalibur Marketing Dude
Fixed-Blade Broadheads Fit In Quiver?
Good evening,
I am looking for 100 grains fixed blade broadheads and hope you guys/gals can help me with my questions. I shoot out to 60 yards in ideal conditions, so broadhead flight is very important to me. A friend recommends that I try the Slick Trick Xbow heads.
1) Will the Slick Trick Xbow 100 grain heads fit inside the stock Matrix quiver? Are the ferrule diameter of the Slick Tricks a close match for the diameter of Zombie shafts?
2) If no to either of the above, can you recommend a good fixed blade head that flies excellent out to 60 yards or so, and fits the Zombie shaft diameter and stock quiver?
Thanks,
I am looking for 100 grains fixed blade broadheads and hope you guys/gals can help me with my questions. I shoot out to 60 yards in ideal conditions, so broadhead flight is very important to me. A friend recommends that I try the Slick Trick Xbow heads.
1) Will the Slick Trick Xbow 100 grain heads fit inside the stock Matrix quiver? Are the ferrule diameter of the Slick Tricks a close match for the diameter of Zombie shafts?
2) If no to either of the above, can you recommend a good fixed blade head that flies excellent out to 60 yards or so, and fits the Zombie shaft diameter and stock quiver?
Thanks,
Current interest: VPA non-vented 125gr, 150gr, 175gr broadhead flight for long range
-
- Posts: 2856
- Joined: Mon Oct 25, 2010 9:02 pm
- Location: S.E. Georgia
- Contact:
Re: Fixed-Blade Broadheads Fit In Quiver?
Can't answer about the shaft size but they fit in my Matrix quiver fine.
Bulldog m380 blackout
Micro 355
Matrix 350LE
Vixen II
Proud member of the Georgia Meat Hunter's Association
"Shooting tomorrow's trophy's...today"
Micro 355
Matrix 350LE
Vixen II
Proud member of the Georgia Meat Hunter's Association
"Shooting tomorrow's trophy's...today"
Re: Fixed-Blade Broadheads Fit In Quiver?
Thanks georgiaboy, I'll go ahead and get some and shoot 'em!
Current interest: VPA non-vented 125gr, 150gr, 175gr broadhead flight for long range
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: Fixed-Blade Broadheads Fit In Quiver?
Tell ya anudder great fixed bladed Bhead the Strikers
Re: Fixed-Blade Broadheads Fit In Quiver?
Slick Tricks ,Wasp Drones and Muzzy MX3 's all fit fine in stock quiver on my Ibex.
Ibex SMF-S5-TactZone-BE Zombies/blazers
Wasp Jak Knife,Drone.
Vixenmaster string.
Wasp Jak Knife,Drone.
Vixenmaster string.
Re: Fixed-Blade Broadheads Fit In Quiver?
Great, thanks guys! Maybe I'll try them all.
Current interest: VPA non-vented 125gr, 150gr, 175gr broadhead flight for long range
-
- Posts: 249
- Joined: Sat Jul 18, 2015 6:53 pm
- Location: Missouri
Re: Fixed-Blade Broadheads Fit In Quiver?
mmc. I use the excal quiver with ZS/Slick Trick Mag. They fit just fine. I carry my quiver in my pack or on my belt loop with no problems.
Stephen
Stephen
Matrix 380
Re: Fixed-Blade Broadheads Fit In Quiver?
Thanks Stephen, thats what I was hoping to hear!
Current interest: VPA non-vented 125gr, 150gr, 175gr broadhead flight for long range
Re: Fixed-Blade Broadheads Fit In Quiver?
60 yards..SCARY in my opinion.but for 35 yards and under a lot use slick trick 100 gr or nap heads..some like g5 points that are sharp..
Re: Fixed-Blade Broadheads Fit In Quiver?
Thanks sproulman,
Yeah, 60 yards is tough for any broadhead. But I like to tinker and improve stuff so gonna see what I can do with them. Been eyeballin' the Strikers too as vixenmaster suggested... probably start with a pack of each and see if I can bring em' under control.
EDIT: Those G5s look tough!!
Yeah, 60 yards is tough for any broadhead. But I like to tinker and improve stuff so gonna see what I can do with them. Been eyeballin' the Strikers too as vixenmaster suggested... probably start with a pack of each and see if I can bring em' under control.
EDIT: Those G5s look tough!!
Current interest: VPA non-vented 125gr, 150gr, 175gr broadhead flight for long range
Re: Fixed-Blade Broadheads Fit In Quiver?
I'm trying VPA 3-Blade Broadheads 100 grain Vented 1 1/8″ Diameter.
They are available from 85 grains to 300 grains.
They fly just like field points. They are almost like a G5 Montec, only they are CNC machined from solid billet carbon steel not cast like the G5's are.
They are available from 85 grains to 300 grains.
They fly just like field points. They are almost like a G5 Montec, only they are CNC machined from solid billet carbon steel not cast like the G5's are.
BD400 w/ TT, HHA, Leupold 2-7x 33mm, 8ptbuk String, Munch Mount "Y", Kwikee-3SS, Dr Stirrup Kit
Grizzly, 8ptbuk String
18" SSST 112 gr Insert, SK300, Ignitor
18" BEZS 110 gr insert, Blazers, Lumenok
VPA 3 blade vented 100 gr
Grizzly, 8ptbuk String
18" SSST 112 gr Insert, SK300, Ignitor
18" BEZS 110 gr insert, Blazers, Lumenok
VPA 3 blade vented 100 gr
- nchunterkw
- Posts: 2906
- Joined: Sat Dec 24, 2011 11:21 am
- Location: Wake Forest, NC
- Contact:
Re: Fixed-Blade Broadheads Fit In Quiver?
The Slick Trick 100's ferrule is a little bit smaller than the 125Magnums or 150 Xbow Tricks. One nice thing about them though is you can "mix and match" blades and ferrules to get about anything you want.
You might look at the RamCats and QAD Exodus too. My Ramcats fly better than my Slicks do, and they fly great. ANd I have heard great things from trusted sources on here about the QAD Exodus. And they all fit in the quiver...but just barely
You might look at the RamCats and QAD Exodus too. My Ramcats fly better than my Slicks do, and they fly great. ANd I have heard great things from trusted sources on here about the QAD Exodus. And they all fit in the quiver...but just barely
Keith
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Re: Fixed-Blade Broadheads Fit In Quiver?
....I am sold on Mechanicals and NAP Spitfires have been my rocket of choice...awesome cutting diameter and the dang tick toters always take an early dirt nap (I love vixenmaster's jargon!)
Anthony
PS: ....and yes they fit in the quiver just fine....in fact I am not sure if there are any BH's which won't fit!
Anthony
PS: ....and yes they fit in the quiver just fine....in fact I am not sure if there are any BH's which won't fit!
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings