Where to get the original hardware for the Bulldog 440
Moderator: Excalibur Marketing Dude
-
- Posts: 23
- Joined: Wed Oct 16, 2019 4:08 pm
Where to get the original hardware for the Bulldog 440
Hello,
I’m new to Excalibur’s and I have a Bulldog 440. I recently bought air breaks and installed them and misplaced the original washer and screws. I am looking to sell the bow and I’m looking to sell the bow without the airbrakes. I tried contacting Excalibur but since it’s archery hunting season for most states they are extremely busy. Sometimes I get a response back from Peter B. Within a few hours but i have not received anything back from him. Does anyone know where I can find the original kit that holds down the limbs? I believe there is a main washer, and then 2 plastic brackets and 2 screws to hold the brackets down. I can not find them anywhere and I’m trying to take the bow apart and put it back to its original form. Any advice would be much appreciated. Thanks in advance!
I’m new to Excalibur’s and I have a Bulldog 440. I recently bought air breaks and installed them and misplaced the original washer and screws. I am looking to sell the bow and I’m looking to sell the bow without the airbrakes. I tried contacting Excalibur but since it’s archery hunting season for most states they are extremely busy. Sometimes I get a response back from Peter B. Within a few hours but i have not received anything back from him. Does anyone know where I can find the original kit that holds down the limbs? I believe there is a main washer, and then 2 plastic brackets and 2 screws to hold the brackets down. I can not find them anywhere and I’m trying to take the bow apart and put it back to its original form. Any advice would be much appreciated. Thanks in advance!
Own:
2019 Bulldog 440 MOBUC
2020 MAG 340 Kryptec Raid
Wish:
to have the rest of the newer 2020 Excalibur crossbow’s with QLT.
2019 Bulldog 440 MOBUC
2020 MAG 340 Kryptec Raid
Wish:
to have the rest of the newer 2020 Excalibur crossbow’s with QLT.
Re: Where to get the original hardware for the Bulldog 440
2019 Bulldog 440:
First of all welcome to the forum.
If you stick around a spell you will gain a whole lot of CB knowledge.
Second of all...why not go back and complete your registration indicating where you hail from....this way members can direct you to somewhere where you might get all of your information or supplies.
You can always call Excalibur direct (understand that they're very busy this time of year),,,,I would ask to talk to Dawn...she might be able to help you....
....who knows someone from the forum may respond to you indicating that they have what you are missing and be willing to ship it to you at no cost....that is just the way that the people on this forum operate.
Anthony
First of all welcome to the forum.
If you stick around a spell you will gain a whole lot of CB knowledge.
Second of all...why not go back and complete your registration indicating where you hail from....this way members can direct you to somewhere where you might get all of your information or supplies.
You can always call Excalibur direct (understand that they're very busy this time of year),,,,I would ask to talk to Dawn...she might be able to help you....
....who knows someone from the forum may respond to you indicating that they have what you are missing and be willing to ship it to you at no cost....that is just the way that the people on this forum operate.
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: Where to get the original hardware for the Bulldog 440
Dawn Neill - (519) 743-6890 Ext 204
Hybrid Micro BD 360
Micro Mag 340
Boo Strings - Trinity Strings
Zombie Slayers
Swat & TOTA Broadheads
Micro Mag 340
Boo Strings - Trinity Strings
Zombie Slayers
Swat & TOTA Broadheads
-
- Posts: 23
- Joined: Wed Oct 16, 2019 4:08 pm
Re: Where to get the original hardware for the Bulldog 440
I tried calling Excalibur customer service and unless it’s a warranty issue with your bow they aren’t going to be getting back to you right away. I did leave a message and Peter called and left me a voice mail because I apparently missed his phone call.
I just want to get this bow ready for resale. I have two sets of Bulldog 440 limbs. Will the 440 limbs work with the BD400? Will it gives the extra 40FPS just by having these new limbs since their for a BD440? Just wondering.
I just want to get this bow ready for resale. I have two sets of Bulldog 440 limbs. Will the 440 limbs work with the BD400? Will it gives the extra 40FPS just by having these new limbs since their for a BD440? Just wondering.
Own:
2019 Bulldog 440 MOBUC
2020 MAG 340 Kryptec Raid
Wish:
to have the rest of the newer 2020 Excalibur crossbow’s with QLT.
2019 Bulldog 440 MOBUC
2020 MAG 340 Kryptec Raid
Wish:
to have the rest of the newer 2020 Excalibur crossbow’s with QLT.
Re: Where to get the original hardware for the Bulldog 440
You will not get more speed from a bd400 by putting bd440 limbs on it. The speed comes from the power stroke (rail length).
Hybrid Micro BD 360
Micro Mag 340
Boo Strings - Trinity Strings
Zombie Slayers
Swat & TOTA Broadheads
Micro Mag 340
Boo Strings - Trinity Strings
Zombie Slayers
Swat & TOTA Broadheads
Re: Where to get the original hardware for the Bulldog 440
If you are stateside, you could contact Danny Miller
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Where to get the original hardware for the Bulldog 440
Google " Horizontal Archery " in Ohio for DANNY MILLER #.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
-
- Posts: 226
- Joined: Fri Sep 26, 2014 4:33 pm
- Location: Ohio
Re: Where to get the original hardware for the Bulldog 440
Danny Miller’s # is (740) 483-2312 curious why your getting rid of the 440. I really like mine.
400 Suppressor TD
Bulldog 440
Matrix 405
Black Eagle Zombies
Black Eagle Executioners
G5 Montecs / Mega meats
Bulldog 440
Matrix 405
Black Eagle Zombies
Black Eagle Executioners
G5 Montecs / Mega meats
-
- Posts: 23
- Joined: Wed Oct 16, 2019 4:08 pm
Re: Where to get the original hardware for the Bulldog 440
Thank you! I don’t know who this Danny Miller guy but I’ll give him a call. I’m not trying to get rid of it right away, I just wanted to make sure I can put the bow back to OEM so it’ll be easy for me to sell it.OhioXBowhunter wrote: ↑Wed Oct 23, 2019 10:17 pmDanny Miller’s # is (740) 483-2312 curious why your getting rid of the 440. I really like mine.
Own:
2019 Bulldog 440 MOBUC
2020 MAG 340 Kryptec Raid
Wish:
to have the rest of the newer 2020 Excalibur crossbow’s with QLT.
2019 Bulldog 440 MOBUC
2020 MAG 340 Kryptec Raid
Wish:
to have the rest of the newer 2020 Excalibur crossbow’s with QLT.
-
- Posts: 226
- Joined: Fri Sep 26, 2014 4:33 pm
- Location: Ohio
Re: Where to get the original hardware for the Bulldog 440
He is the Excalibur guru at Horizontal Archery any questions call him he knows everything. Are you in the US.
400 Suppressor TD
Bulldog 440
Matrix 405
Black Eagle Zombies
Black Eagle Executioners
G5 Montecs / Mega meats
Bulldog 440
Matrix 405
Black Eagle Zombies
Black Eagle Executioners
G5 Montecs / Mega meats
Re: Where to get the original hardware for the Bulldog 440
Yup, call Danny, he will set you up. I did the exact same thing two months ago. My BD400 had air brakes on it standard and I wanted to try it without them. I think it was about $8 (give it take a dollar or two) for the pieces. Oh, and I think I chatted with him for about 30-40 minutes yacking about triggers.
For what it is worth, my BD400 likes the air brakes. For some reason it actually a few fps faster with them. Goes against what everybody says.
For what it is worth, my BD400 likes the air brakes. For some reason it actually a few fps faster with them. Goes against what everybody says.
Micro Suppressor 400 TD (Two of 'em)
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Matrix 380
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Matrix 380
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!