Ordered a left over micro 355 from Dave at Wyverns. Should be here Thursday. I'm going to order some black eagle zombies and dont want my spitfires sticking out past my stirrup. What length do you guys recommend.
Thanks Booge
Micro 355 bolt length
Moderator: Excalibur Marketing Dude
Micro 355 bolt length
Bulldog 360
Micro 355
Trigger Tech
Zombie Slayers Spitfires
Vixenmaster Strings
Micro 355
Trigger Tech
Zombie Slayers Spitfires
Vixenmaster Strings
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: Micro 355 bolt length
I would use 16 or 16.5
Re: Micro 355 bolt length
16" with 110 grains in the snout, use 125 grain heads, and you have plenty up front if you want to use Lighted nocks on the tail end.
It’s not the way you rock, it’s the way that you roll!
-
- Posts: 4260
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Micro 355 bolt length
As dan said the zombie 16.5 and 110 insert with a 125 grain head is the best combination l have found.
The extra 25 grains on the head adds minimal speed loss but maximum foc also shoots pretty good on a windy day......the kind of day when deer rut.
Them short bolts need some weight up front.
The extra 25 grains on the head adds minimal speed loss but maximum foc also shoots pretty good on a windy day......the kind of day when deer rut.
Them short bolts need some weight up front.
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Re: Micro 355 bolt length
Thanks for the info. It's very helpful.
Bulldog 360
Micro 355
Trigger Tech
Zombie Slayers Spitfires
Vixenmaster Strings
Micro 355
Trigger Tech
Zombie Slayers Spitfires
Vixenmaster Strings
Re: Micro 355 bolt length
I've used 15, 15.5, 16, 16.5 and 17 with no noticable difference.
Settlled on 15.5" for all my micros
Settlled on 15.5" for all my micros
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
- AJ01
- Posts: 2505
- Joined: Fri Nov 24, 2017 10:09 am
- Location: Deep in the Heart of the East Texas Piney Woods!
Re: Micro 355 bolt length
I use 16.5 Black Eagles in my Micro 355. 110gr brass up front. Blazer vanes and the tail lights are Lumenoks.
I shoot 100gr mechanicals.
Works for me!!
AJ
I shoot 100gr mechanicals.
Works for me!!
AJ
“Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out and loudly proclaiming "Wow, What a Ride!