![Image](https://i.postimg.cc/brN7mhbP/DD501991-8-DC7-4-A3-B-84-C7-FE2911-BB3429.jpg)
Am I doing something wrong ? Post fixed
Moderator: Excalibur Marketing Dude
Am I doing something wrong ? Post fixed
Son bought me a new crossbow and after about 30 shots I noticed this. Is this normal for these
![Image](https://i.postimg.cc/brN7mhbP/DD501991-8-DC7-4-A3-B-84-C7-FE2911-BB3429.jpg)
![Image](https://i.postimg.cc/brN7mhbP/DD501991-8-DC7-4-A3-B-84-C7-FE2911-BB3429.jpg)
Re: Am I doing something wrong ? Post fixed
Nope! That should not be happening though.
It’s not the way you rock, it’s the way that you roll!
- AJ01
- Posts: 2497
- Joined: Fri Nov 24, 2017 10:09 am
- Location: Deep in the Heart of the East Texas Piney Woods!
Re: Am I doing something wrong ? Post fixed
So...are you referring to the gouges along side the frame?
“Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out and loudly proclaiming "Wow, What a Ride!
Re: Am I doing something wrong ? Post fixed
Something certainly isn't right. I've got about 400 shots on my Micro 400TD and all I've managed to do is polish camo on the sides of the rail. All of the camo is still intact. I did get a replacement set of hooks because the plastic on the hooks was starting to wear after that many shots at the high draw weight.
Which model of bow is this, and what is being used to cock it? The stock rope or crank, or something else?
It seems like something metal on the inside of the hook on that side may be exposed and is touching the rail. It just looks a bit odd to me because the scratching should be in a straight line along the rail. The line seems to get farther away from the rail as it approaches the latches, but that could just be due to the angle of the photo.
I'm guessing this marking is only on one side of the rail.
Which model of bow is this, and what is being used to cock it? The stock rope or crank, or something else?
It seems like something metal on the inside of the hook on that side may be exposed and is touching the rail. It just looks a bit odd to me because the scratching should be in a straight line along the rail. The line seems to get farther away from the rail as it approaches the latches, but that could just be due to the angle of the photo.
I'm guessing this marking is only on one side of the rail.
Micro Wolverine/Matrix 350 SE
Recovering Excalaholic![Laughing :lol:](./images/smilies/icon_lol.gif)
Recovering Excalaholic
![Laughing :lol:](./images/smilies/icon_lol.gif)
-
- Posts: 4805
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: Am I doing something wrong ? Post fixed
The hooks on the cocking device may have the shaft tha holds the wheel protruding a bit. I would check that and see first. It may also have a burr on it.
Re: Am I doing something wrong ? Post fixed
It’s on both sides it’s almost like the finish did t take. It does not effect the accuracy one bit. It is a suppressor 400 and I am using the crankaroo that came with it.
Re: Am I doing something wrong ? Post fixed
When your cranking it look to see if the hooks are dragging along the rail
vixen 11
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
Re: Am I doing something wrong ? Post fixed
Before you crank it, but after you're all set to cock it, snap a picture, then just wait, someone here will see if there is some issue with the equipment, or method.
It’s not the way you rock, it’s the way that you roll!
- AJ01
- Posts: 2497
- Joined: Fri Nov 24, 2017 10:09 am
- Location: Deep in the Heart of the East Texas Piney Woods!
Re: Am I doing something wrong ? Post fixed
That was my first thought!!flightattendant100 wrote: ↑Sun Dec 06, 2020 11:38 amThe hooks on the cocking device may have the shaft tha holds the wheel protruding a bit. I would check that and see first. It may also have a burr on it.
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
“Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out and loudly proclaiming "Wow, What a Ride!
Re: Am I doing something wrong ? Post fixed
Wouldn’t be the first time that happened.AJ01 wrote: ↑Mon Dec 07, 2020 9:46 amThat was my first thought!!flightattendant100 wrote: ↑Sun Dec 06, 2020 11:38 amThe hooks on the cocking device may have the shaft tha holds the wheel protruding a bit. I would check that and see first. It may also have a burr on it.![]()
Some people just like stepping on rakes